Guide · 6 min read
High Performance is a second type of Mac Screen Sharing: 30 or 60 frames a second, stereo sound and one or two virtual displays. It needs Apple silicon and macOS Sonoma 14 or later on both Macs and a fast, steady network. Without those, connect as Standard, which adapts to the network you have.
Screen Sharing comes with every Mac, and since macOS Sonoma it connects in one of two types: Standard or High Performance. This guide covers what the second one adds, what it needs, how to choose it, and where that leaves an Intel Mac, Wormhole included. Each fact about macOS comes from the page that owns it, listed under the post.
What is High Performance screen sharing on a Mac?
Apple's guide describes the Screen Sharing app's two types of connection in a line each:
| Standard | High Performance | |
|---|---|---|
| What Apple says it does | Adapts resolution and frame rate to network conditions | Supports stereo audio, HDR video reference mode, 4:4:4 chroma subsampling, high frame rates (30 or 60 frames a second) and low latency |
| What you see | The other Mac's screen | One or two virtual displays, each up to 4K |
| What it needs | Apple's page lists no requirements for it | Apple silicon, macOS Sonoma 14 or later and a fast network: the list is below |
Six Colors, in June 2026, describes the difference: High Performance does not mirror the other Mac's screen. It creates virtual displays on that Mac, and leaves the settings of its real display as they were.
What does High Performance need?
Apple's Remote Desktop guide, which documents the same mode for that app, has the whole list, and its page on the two types repeats most of it:
- Apple silicon in both Macs. An Intel Mac at either end rules it out.
- macOS Sonoma 14 or later on both.
- A fast, steady network. Apple's figure is 75 megabits per second for a single 4K display, with consistent low latency, and it recommends a wired connection.
- UDP ports 5900, 5901 and 5902 open between the two Macs. Apple's list of ports also gives Screen Sharing TCP port 5900.
- One session at a time. Only one High Performance session can be active on each Mac.
How do I turn on High Performance screen sharing?
You choose the type on the Mac in front of you, when you make the connection:
- Turn on Screen Sharing on the Mac you want to reach. Open System Settings, click General, then Sharing, and turn on Screen Sharing.
- Open the Screen Sharing app on the Mac in front of you. It is in Applications › Utilities.
- Connect. Select the other Mac under Network or All Connections in the sidebar and click Connect. Or click New Connection, enter the Mac's hostname or an Apple Account, and click Connect. Sign in if you are asked.
- Select High Performance when the Select Screen Sharing Type window appears.
- Choose one or two virtual displays from the Display Type pop-up menu, then click Continue.
Screen Sharing saves the connection under All Connections. To change its type later, choose Connections from the Window menu, click All Connections, then the Info button beside the connection: Apple's page lists Screen Sharing Type and Display Type among the settings, for connections you created yourself.
Apple's steps say "if" that window is displayed. When it is not, go back to the list above, starting with each Mac's chip and macOS version.
What happens on the other Mac's own screen?
It goes dark. Apple's guide says that when you sign in with the name of the user who is logged in at that Mac, the displays connected to it are blanked to give you privacy, and that nobody can use that Mac while you are connected this way. Six Colors reports the same, and says it can be seen as a privacy advantage. Apple adds that someone at that Mac can end the session with the Escape key on its keyboard, unless Remote Management is on there.
Does High Performance work with an Intel Mac?
No. Apple's Remote Desktop guide says both Mac computers must have Apple silicon. That leaves Standard, or a separate app: where Wormhole stands is below.
Can I use High Performance over the internet?
Apple gives one list of requirements and does not say where the two Macs have to be: the three UDP ports open between them, high bandwidth, and consistent low latency. Its pages on High Performance say nothing about a VPN.
Away from home, start with Standard, which adapts to the network. How to use Mac Screen Sharing over the internet has the steps. Do not forward Screen Sharing's ports on your router instead: is Mac Screen Sharing secure? has what happened to Macs that could be reached that way.
Where does Wormhole fit?
Wormhole is a separate app for the same two Macs. It does not use Screen Sharing, so it has neither type. It needs macOS 14 Sonoma or later on both Macs, as High Performance does, but not the chip: it runs on Apple silicon or Intel. For a pair that High Performance turns away, such as an Intel iMac and a MacBook, it is one more choice beside Standard.
How it works:
- One window, not a display. Pick a window from the other Mac's list and it opens here as a window of its own, with its own Dock icon and ⌘Tab entry. Whole screen is in the same list.
- The other Mac's own pixels. A window is captured at the size it has on that Mac's display, Retina included, and sent as H.264 video. There is no virtual display.
- One TCP connection for each window, to port 47473 on the Mac that shares.
- No type to choose. From version 1.4.1 the Mac that shares measures the connection and sends what it can carry.
What it does not do, and what has not been tried:
- It has not been put beside High Performance. Its picture has been measured on one Intel iMac playing both ends, so this page claims nothing about which is faster or sharper.
- No HDR and no 4:4:4. The picture is 8-bit H.264 in sRGB, with colour at half resolution. From version 1.4.1 on the Mac you view on, greys are shown in the other Mac's own tones, as measured on one Intel Mac; Apple silicon has not been checked yet, at either end.
- A very large picture is scaled down. Anything more than 4096 pixels on a side when it is captured, the whole screen of a 5K display for one, is shrunk before it is sent and enlarged again here. A window from a display that is not Retina arrives at that display's pixels. Both are read from the code, and neither has been looked at yet.
- A Mac with no display may have nothing to show. It has not been tested on a headless Mac mini. If the picker says there is no display, an HDMI dummy plug gives macOS one.
- The other Mac's screen is not blanked. The window you click comes to the front there, and while sharing is on that Mac stays awake and unlocked.
- Sound has not been checked by ear. Each remote window has a speaker button for it, off by default.
- Between two places it needs a route you run, such as Tailscale. Up to version 1.4.0, over a connection Tailscale relayed, the picture stuttered and fell behind. From 1.4.1 the Mac that shares sends fewer pictures a second over such a connection, and text is soft for two or three seconds after a window stops. That was measured over a simulated slow connection on one desk: 1.4.1 has not been used between two places yet, and a direct connection has never been tried.
- It is Mac to Mac only, with the app on both. The free plan opens one remote window at a time (pricing).
The known issues page has the others, typing, shortcuts and files among them, and the setup guide covers pairing.
Which one fits which Macs?
- Two Macs with Apple silicon on a wired network, and you want the whole desktop: High Performance.
- An Intel Mac at either end, or a network that cannot hold 75 megabits per second: Standard.
- One app from the other Mac beside your own windows: that is the case Wormhole is for. How it differs from Screen Sharing has the detail.
- An iPhone, an iPad or a Windows PC at your end: Wormhole cannot do that. The other ways to reach a Mac are compared with their sources.
Questions people ask
How big can a virtual display be?
Apple's Remote Desktop guide gives the largest as 4K: 3840 × 2160 pixels, or 1920 × 1080 in HiDPI. The Mac User Guide describes Dynamic Resolution: when it is on, the virtual display on the other Mac matches the size of the screen sharing window.
It says it was unable to start a High Performance connection. What now?
People in Apple's community quote that message, which ends by telling you to change the screen sharing type to standard and try again. Do that first, from the connection's Info button: in the thread listed under this post, Standard went on working between the same two Macs, and its writer reports that High Performance came back after a restart. Then go through the requirements.
Related
- Can you drag a window between Macs with Universal Control?
- Apple Remote Desktop vs Screen Sharing vs Remote Management
- Mac Screen Sharing not working? What to check, in order
Sources
- Apple — Screen sharing type options on Mac (Mac User Guide)
- Apple — Use High Performance screen sharing (Apple Remote Desktop User Guide)
- Apple — Share the screen of another Mac (Mac User Guide)
- Apple — Change screen sharing connection settings on Mac (Mac User Guide)
- Apple — Turn Mac screen sharing on or off (Mac User Guide)
- Apple — TCP and UDP ports used by Apple software products
- Six Colors — High Performance mode allows sharing another Mac's display as if your own (June 2026)
- Apple Community — the thread "Screen Sharing High Performance option suddenly broken"